|
|
|
|
 |
| DCN
pre and post sales support |
|
Pre-sales
support:
Nte
can assist local resellers with the design of DCN systems
for smaller conference systems and in particular the stand-alone
CCU LBB 3500/05, or can design larger and more complex Congress
platforms on a consultant basis. For pre-sales support complete
form.
>>
The
Bosch DCN is extremely flexible but certain rules need to
be observed during the design process, including:
The
power consumption - The power rating of the contribution
units are expressed in terms PCF (Power Consumption Factor)
and has a bearing on the number of units that may be connected
to the system.
>>
|
|
System
cable limits - There are certain rules regarding the length
of the cable that must be taken into consideration.
>>
Installation
- Nte
can assist with the installation, programming and customer
training of Congress, or for customers with no DCN training
Nte can undertake the complete project. Training on the
installation of DCN can also be arranged by Nte. If you
require assistance complete the form.
>>
After-
sales support:
The DCN is supplied with a 3-year
manufacturers warranty from Bosch. Nte offer full technical
support by telephone or email on all products supplied and
is backed-up the the resources of Bosch in the UK, europe
and throughout the world.
|
|
|
|
|
|
|
The
Power Consumption Factor (PCF) of contribution units connected
to a CCU has a bearing on the total number of such units that
can be connected. The maximum number of units quoted for a
CCU on this website and in the pdf downloads is based on all
units having a PCF of 1. This means that, for example, a stand-alone
DCN CCU LBB 3500/05, which can accommodate 90 units of power
of PCF can also accommodate 180 units of PCF 0.5.
PCF's
for DCN contribution equipment are listed below in the table:
|
| |
| Part
number |
Description |
PCF
|
| LBB
3510/00 |
PC
Network card - Now 'end-of-line' |
1
|
| LBB
3512/00 |
Data
distribution board |
1
|
| LBB
3513/00 |
Analogue
audio Input/Output board |
1
|
| LBB
3514/00 |
Trunk
splitter |
1
|
| LBB
3515/00 |
Tap-off
unit |
1
|
| LBB
3520/10 |
Interpreters
unit |
2.5
|
| LBB
3524/00 |
Channel
selector panel |
0.5
|
| LBB
3524/10 |
Channel
selector panel with backlighting |
0.5
|
| LBB
3626/10 |
Channel
selector panel with backlighting (large font) |
0.5
|
| LBB
3530/xx |
Delegate
discussion unit |
1
|
| LBB
3531xx |
Delegate
discussion unit with
channel selector |
1
|
| LBB
3533/xx |
Chairman
discussion unit |
1
|
| LBB
3534/xx |
Chairman
discussion unit with channel selector |
1
|
| LBB
3535/xx |
Dual
audio interface unit |
1.5
|
| LBB
3540/xx |
Multipurpose
connection unit with chip card reader |
2
|
| LBB
3544/xx |
Concentus
delegate
unit |
2
|
| LBB
3545/00 |
Concentus
delegate unit with channel selector |
2
|
| LBB
3546/00 |
Concentus
unit with graphic LCD and chip-card reader |
2.5
|
| LBB
3547/00 |
|
2.5
|
|
|
|
|
 |
|
|
|
.
|
The
total cable length (using standard LBB 3516/xx) between
the CCU and the last unit in any branch of the system
must not exceed 250m. This includes all extension cables
and the 2m cable that is attached to each system unit. |
|
.
|
The
total length of the extension cable from the CCU to
the 1st regenerative tap-off (ie., from Trunk Cable
Splitter LBB 3514/00, Audio Media Interface Unit LBB
3508/00 or Extension Power Supply Unit LBB 3506/00)
must not exceed 100m. |
|
.
|
The
total length of the extension cable between regenerative
tap-off outputs must not exceed 100m. |
|
.
|
The
maximum distance between tabletop units is normally
1.6m with the supplied cable. This distance can be increased
by using the LBB 3516/xx Extension Cable Assembly. |
|
|
|
|
